skip to main content
Model E
Parts listed here are compatible with Model E Indoor Rowers (manufactured from August 2006–present).

Model E There are 79 products.

per page
Showing 1 - 25 of 79 items
  • CHF 220,00

    Features wireless heart rate monitoring, the ability to store workouts to a USB flash drive (not included), and is backlit for improved visibility. Device holder or Smartphone Cradle included in some kits*. *See More Info.

    CHF 220,00
  • CHF 162,00

    For use with Model E Indoor Rowers manufactured from August 2006–March 2011. Includes caster wheels.

    CHF 162,00
  • CHF 162,00

    For use on the Model E Indoor Rower manufactured from March 2011–present. Includes caster wheels. See more info.

    CHF 162,00
  • CHF 115,00

    For use with Model E Indoor Rowers manufactured from August 2006–March 2011. Includes molded foot caps. Does not include the hardware or the rear bumber.

    CHF 115,00
  • CHF 115,00

    For use with Model E Indoor Rowers manufactured from March 2011–present. Includes molded foot caps. Does not include the hardware or the rear bumber. See more info.

    CHF 115,00
  • CHF 71,00

    For use with Model C Indoor Rowers. Replaces the original Model C parts with smoother, quieter Model D parts. This kit includes 14 tooth quiet sprocket, axle, chain idler pulley, nickel chain with connectors and swivel, 17mm bearing, 17mm bearing cup, screws and nuts. See more info.

    CHF 71,00
  • CHF 67,00

    For use on all Model C, D and E Indoor Rowers.  Includes seat top, seat frame, seat rollers and hardware. See more info.

    CHF 67,00
  • CHF 45,50

    For use with Model D and E Indoor Rowers. This item includes one 8' 4" long nickel plated chain with a brass swivel at the handle end and chain connector for the inside end. It also includes a 14 tooth sprocket (compatible with Model D and E Indoor Rowers only) for the flywheel axle. If you need to replace both the chain and sprocket, this is the part...

    CHF 45,50
  • CHF 39,00

    For use with Model C, D and E Indoor Rowers. Includes on 8' 4" long chain with a brass swivel at the handle end and chain connector for the inside end. If your chain is badly rusted, has seized links or is broken, you will need to replace it with this part. See more info.

    CHF 39,00
  • CHF 29,00

    This is the damper-side cover for the gray Model D and Model E Indoor Rower. Does not include the four damper fan cover screws (order separately, part number 1276). See more info.

    CHF 29,00
  • CHF 26,50

    For use with Model D and E Indoor Rowers. This is the generator base and coil that transmit flywheel motion to and generates power for the Performance Monitor on your indoor rower. See more info. 

    CHF 26,50
  • CHF 26,00

    For use on all Model C, D and E Indoor Rowers.  Includes seat top, seat frame, and hardware. See more info.

    CHF 26,00
  • CHF 25,00

    For use with Model D and E Indoor Rowers and the SkiErg. This is the sensor coil for the power generator that transmits flywheel motion to and generates power for the Performance Monitor on your indoor rower or SkiErg. See more info.

    CHF 25,00
  • CHF 25,00

    For use on all Model C, D and E Indoor Rowers.  This is the stainless steel track for all rowers manufactured after January 1994. It measures 48 inches long and includes double-sided tape and two rivets for installation. See more info.

    CHF 25,00
  • CHF 23,00

    For use on all Model D, E, Dynamic Indoor Rowers, SkiErg1s and SkiErg2s. This is the metal perforated part of the flywheel cage that wraps around the circumference of the flywheel. This part includes the connectors, screw and nut. See more info.

    CHF 23,00
  • CHF 20,00

    Replacement handle for the Model D, E and Dynamic Indoor Rowers. Overmolded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. See more info.

    CHF 20,00
  • CHF 18,00

    For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws and lock washers (four each) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney"...

    CHF 18,00
  • CHF 14,50

    For use on the Model D and E Indoor Rower.

    CHF 14,50
  • CHF 12,50

    For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...

    CHF 12,50
  • CHF 12,00

    For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.

    CHF 12,00
  • CHF 8,70

    For use with all Model D and Model E Indoor Rowers manufactured from August 2006–present.

    CHF 8,70
  • CHF 8,70

    For use with all Model D and Model E Indoor Rowers manufactured from August 2006–present.

    CHF 8,70
  • CHF 8,00

    Chain Oil for use on the chains in concept2 Rowing machines

    CHF 8,00
  • CHF 6,51

    For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time (see part number 1916). See more info.

    CHF 6,51
  • CHF 6,51

    For use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram

    CHF 6,51
Showing 1 - 25 of 79 items