Dynamic
Parts listed here are compatible with Dynamic Indoor Rowers (manufactured from November 2010–present).

Dynamic There are 30 products.

per page
Showing 1 - 25 of 30 items
  • CHF 210,00

    Our most advanced Performance Monitor. Features wireless heart rate monitoring, the ability to store workouts to a USB flash drive (sold separately), and is backlit for improved visibility in low light environments. See more info.

    CHF 210,00
  • CHF 26,00

    This is the handle drive cord for a Dynamic Indoor Rower. The handle drive cord is a single cord that is connected to the handle on one end and the foot carriage on the other end. Not for use on Model A, B, C, D, or E. See more info.

    CHF 26,00
  • CHF 23,00

    For use on all Model D, E, Dynamic Indoor Rowers, SkiErg1s and SkiErg2s. This is the metal perforated part of the flywheel cage that wraps around the circumference of the flywheel. This part includes the connectors, screw and nut. See more info.

    CHF 23,00
  • CHF 20,00

    Replacement handle for the Model D, E and Dynamic Indoor Rowers. Overmolded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. See more info.

    CHF 20,00
  • CHF 19,00

    For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...

    CHF 19,00
  • CHF 16,80

    For use on all Dynamic Indoor Rowers. See more info.

    CHF 16,80
  • CHF 15,00

    For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws and lock washers (four each) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney"...

    CHF 15,00
  • CHF 8,70

    For use with Dynamic Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain and cord on recovery. The cord includes the metal clips on either end. See more info.

    CHF 8,70
  • CHF 7,00

    For use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram

    CHF 7,00
  • CHF 5,90

    For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Does not include the mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame, because it can usually be reused. If you need the hardware, order part...

    CHF 5,90
  • CHF 5,00

    For use with updated Model D, Model E and Dynamic Indoor Rowers (made after July 21, 2006) only. If your indoor rower was made before July 21, 2006, order part number 1501 instead. Two per machine. Sold individually.

    CHF 5,00
  • CHF 4,50

    For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the right caster wheel.

    CHF 4,50
  • CHF 4,50

    For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel.

    CHF 4,50
  • CHF 4,00

    For use with the updated Model D, Model E and Dynamic Indoor Rowers. Left footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram

    CHF 4,00
  • CHF 4,00

    For use with the updated Model D, Model E and Dynamic Indoor Rowers. Right footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram

    CHF 4,00
  • CHF 3,00

    For use on all Model B, C, D, E and Dynamic Indoor Rowers. This is the R8 bearing located outside of the flywheel. The corresponding bearing cup (part number 1013 or 258 depending on which model you have) is sold separately. See more info.

    CHF 3,00
  • CHF 3,00

    For the Dynamic Indoor Rower only. The clear plastic Wind Shield is designed to deflect air coming from the flywheel away from the rower´s body.

    CHF 3,00
  • CHF 2,00

    For use with Model A, B, C, D, E and Dynamic Indoor Rowers. This is the hard plastic cap that goes on the rear and/or front metal legs of the indoor rower to protect your carpet or floor and keep the machine from sliding back and forth while you row. Two to four per machine, depending on age and indoor rower model. Sold individually. See more info.

    CHF 2,00
  • CHF 2,00

    For use on all Model C, D, E, and Dynamic Indoor Rowers and the SkiErg. Using this knob instead of a nut makes it easier to take the monitor on and off of the equipment.

    CHF 2,00
  • CHF 1,30

    This is the shock cord (bungee) and anchors for the seat on the Dynamic Indoor Rower. See more info.

    CHF 1,30
  • CHF 0,70

    This is the bolt for the top seat roller for all Model C, D, E and Dynamic Indoor Rowers. Order two per machine. See more info.

    CHF 0,70
  • CHF 0,50

    For use on all Model C, D, E and Dynamic Indoor Rowers as well as all SkiErgs. This is the rubber bearing cup that holds the R8 bearing on indoor rowers (part number 232, sold separately) and the 12mm bearing on SkiErgs. See more info.

    CHF 0,50
  • CHF 0,10

    Used in various places on the Model D, E and Dynamic Indoor Rower and all SkiErgs.

    CHF 0,10
  • CHF 0,10

    This is the 1/4-20 Nylock nut that is used with the composite handle that comes standard on the Model D and E Indoor Rowers. The corresponding U-bolt is part number 244. Order two per handle. Also used in various places on the Model C and Dynamic Indoor Rower and all SkiErgs.  See more info.

    CHF 0,10
Showing 1 - 25 of 30 items