Model D, Original
Parts listed here are compatible with Model D Indoor Rowers manufactured from July 14, 2003–July 21, 2006 (serial numbers 071403–072106).

Model D, Original There are 66 products.

per page
Showing 1 - 25 of 66 items
  • CHF 210,00

    Our most advanced Performance Monitor. Features wireless heart rate monitoring, the ability to store workouts to a USB flash drive (sold separately), and is backlit for improved visibility in low light environments. See more info.

    CHF 210,00
  • CHF 73,00

    For use on all Model C, D and E Indoor Rowers.  Includes seat top, seat frame, seat rollers and hardware. See more info.

    CHF 73,00
  • CHF 69,90

    For use with Model D and E Indoor Rowers. This item includes one 8' 4" long nickel plated chain with a brass swivel at the handle end and chain connector for the inside end. It also includes a 14 tooth sprocket (compatible with Model D and E Indoor Rowers only) for the flywheel axle. If you need to replace both the chain and sprocket, this is the part...

    CHF 69,90
  • CHF 55,00

    For use with Model C, D and E Indoor Rowers. Includes on 8' 4" long chain with a brass swivel at the handle end and chain connector for the inside end. If your chain is badly rusted, has seized links or is broken, you will need to replace it with this part. See more info.

    CHF 55,00
  • CHF 41,00

    For use with original Model D Indoor Rowers only. Includes the most common wear and tear parts to keep your Model D in top condition. See more info.

    CHF 41,00
  • CHF 32,00

    For use with Model D and E Indoor Rowers only. This is a 14 tooth sprocket (gear) for the Model D or E flywheel axle and the Flywheel Cog Tool required to change the sprocket. A new chain (part number 1941) is also strongly recommended if you are replacing the sprocket. See more info.

    CHF 32,00
  • CHF 29,00

    For use on all Model C, D and E Indoor Rowers.  Includes seat top, seat frame, and hardware. See more info.

    CHF 29,00
  • CHF 27,00

    This is the damper-side cover for the light blue Model D Indoor Rower. Does not include the four damper fan cover screws (order separately, part number 1276). See more info.

    CHF 27,00
  • CHF 26,50

    For use with Model D and E Indoor Rowers. This is the generator base and coil that transmit flywheel motion to and generates power for the Performance Monitor on your indoor rower. See more info. 

    CHF 26,50
  • CHF 25,00

    For use on the Model D and E Indoor Rower.

    CHF 25,00
  • CHF 25,00

    For use on all Model C, D and E Indoor Rowers.  This is the stainless steel track for all rowers manufactured after January 1994. It measures 48 inches long and includes double-sided tape and two rivets for installation. See more info.

    CHF 25,00
  • CHF 23,00

    For use on all Model D, E, Dynamic Indoor Rowers, SkiErg1s and SkiErg2s. This is the metal perforated part of the flywheel cage that wraps around the circumference of the flywheel. This part includes the connectors, screw and nut. See more info.

    CHF 23,00
  • CHF 23,00

    For use with Model D and E Indoor Rowers and the SkiErg. This is the sensor coil for the power generator that transmits flywheel motion to and generates power for the Performance Monitor on your indoor rower or SkiErg. See more info.

    CHF 23,00
  • CHF 21,00

    This is the metal part on the front top and front bottom of the monorail that makes contact with the hangar bolt tube on the front half of the indoor rower. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. Order two per machine. See more info.

    CHF 21,00
  • CHF 21,00

    For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time (see part number 1916). See more info.

    CHF 21,00
  • CHF 20,00

    Replacement handle for the Model D, E and Dynamic Indoor Rowers. Overmolded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. See more info.

    CHF 20,00
  • CHF 19,00

    For use on all light blue Model D Indoor Rowers manufactured from July 2003–July 2012. See more info.

    CHF 19,00
  • CHF 19,00

    For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...

    CHF 19,00
  • CHF 15,00

    For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws and lock washers (four each) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney"...

    CHF 15,00
  • CHF 12,00

    For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.

    CHF 12,00
  • CHF 8,00

    Chain Oil for use on the chains in concept2 Rowing machines

    CHF 8,00
  • CHF 7,54

    For use with Model C and original Model D Indoor Rowers. This is the Framelock Kit for all Model C and original Model D Indoor Rowers. It includes the axle, the framelock, the framelock cord, two screws, two washers and a hexkey tool.

    CHF 7,54
  • CHF 7,00

    For use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram

    CHF 7,00
  • CHF 5,90

    For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Does not include the mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame, because it can usually be reused. If you need the hardware, order part...

    CHF 5,90
  • CHF 5,30

    This is the part of the indoor rower that connects to the Performance Monitor on one end and the chain guide brackets on the other. For use on all Model C and Model D Indoor Rowers. See more info.

    CHF 5,30
Showing 1 - 25 of 66 items