skip to main content
Model C

Parts listed here are compatible with Model C Indoor Rowers. Model Cs were manufactured from 1993–2003.

Model C There are 60 products.

per page
Showing 1 - 25 of 60 items
  • CHF 225,00

    Features wireless heart rate monitoring, the ability to store workouts to a USB flash drive (not included), and is backlit for improved visibility. Device holder or Smartphone Cradle included in some kits*. *See More Info.

    CHF 225,00
  • CHF 140,00

    This is the damper-side cover for the Model C Indoor Rower.  Does not include the damper fan cover screws (order separately, part number 1231). See more info.

    CHF 140,00
  • CHF 71,99

    For use on all Model C, D and E Indoor Rowers.  Includes seat top, seat frame, seat rollers and hardware. See more info.

    CHF 71,99
  • CHF 63,00

    For use with Model C Indoor Rowers only. Includes the most common wear and tear parts to keep your Model C in top condition. See more info.

    CHF 63,00
  • CHF 42,49

    For use with Model C, D and E Indoor Rowers. Includes on 8' 4" long chain with a brass swivel at the handle end and chain connector for the inside end. If your chain is badly rusted, has seized links or is broken, you will need to replace it with this part. See more info.

    CHF 42,49
  • CHF 38,00

    For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.

    CHF 38,00
  • CHF 38,00

    For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.

    CHF 38,00
  • CHF 31,50

    This is the metal part on the front top and front bottom of the monorail that makes contact with the hangar bolt tube on the front half of the indoor rower. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. Order two per machine. See more info.

    CHF 31,50
  • CHF 28,00

    For use on all Model C, D and E Indoor Rowers.  Includes seat top, seat frame, and hardware. See more info.

    CHF 28,00
  • CHF 27,00

    For use on all Model C, D and E Indoor Rowers.  This is the stainless steel track for all rowers manufactured after January 1994. It measures 48 inches long and includes double-sided tape and two rivets for installation. See more info.

    CHF 27,00
  • CHF 24,99

    For use with Model A and C Indoor Rowers. This is the pickup (sensor) and cable (wire) that transmit flywheel to the Performance Monitor on your indoor rower. If your monitor lights up with zeros but the display does not change when you begin rowing, you may need to replace this part. If the cable or cable housing is cut or broken you will definitely need...

    CHF 24,99
  • CHF 23,00

    For use with Model B and C Indoor Rowers. This kit allows you to retrofit the handle that comes standard on the Model D, E and Dynamic Indoor Rowers to your Model B or C. See more info.

    CHF 23,00
  • CHF 22,00

    For use with Model C and original Model D Indoor Rowers. This is the Framelock Kit for all Model C and original Model D Indoor Rowers. It includes the axle, the framelock, the framelock cord, two screws, two washers and a hexkey tool.

    CHF 22,00
  • CHF 21,00

    Replacement handle for the Model D, E and Dynamic Indoor Rowers. Overmolded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. See more info.

    CHF 21,00
  • CHF 19,50

    For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws and lock washers (four each) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney"...

    CHF 19,50
  • CHF 16,01

    For use on the Model D and E Indoor Rower.

    CHF 16,01
  • CHF 13,49

    For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...

    CHF 13,49
  • CHF 10,01

    Replacement case front for the PM2 monitor.

    CHF 10,01
  • CHF 9,00

    For use with Model C Indoor Rowers. This is the lever and damper (shutter) on the side of the flywheel housing that slides up and down to change the airflow through the flywheel. Less air through the flywheel (setting = 1) means less drag when rowing; more air through the flywheel (setting = 10) means more drag. Fits Model C Indoor Rowers only. See more...

    CHF 9,00
  • CHF 8,50

    For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.

    CHF 8,50
  • CHF 8,00

    Chain Oil for use on the chains in concept2 Rowing machines

    CHF 8,00
  • CHF 7,49

    For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time (see part number 1916). See more info.

    CHF 7,49
  • CHF 7,49

    For use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color. This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram

    CHF 7,49
Showing 1 - 25 of 60 items