- Deutsch
- English
No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Parts listed here are compatible with Model E Indoor Rowers (manufactured from August 2006–present).
Model E There are 71 products.
-
CHF 4,99
Foot Caster, Right
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the right caster wheel.
CHF 4,99 -
CHF 4,99
Foot Caster, Left
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel.
CHF 4,99 -
CHF 4,40
T27 6-Lobe Driver
T27 6-Lobe driver required to turn the front leg fasteners (part number 2952) on Model C, D (original and updated) and E Indoor Rowers.
CHF 4,40 -
CHF 3,90
Footstretcher Cover, Right
For use with the updated Model D, Model E and Dynamic Indoor Rowers. Right footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
CHF 3,90 -
CHF 3,90
Footstretcher Cover, Left
For use with the updated Model D, Model E and Dynamic Indoor Rowers. Left footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
CHF 3,90 -
CHF 3,81
Return Mechanism Cover—Model C, D and E
For use on all Model C, D and E Indoor Rowers. This cover fits the underside of the main box frame to protect the return mechanism from dust and to keep little fingers and pets' tails safe from the moving parts inside. See more info.
CHF 3,81 -
CHF 3,81
Seat Roller, Bottom
For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Does not include the mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame, because it can usually be reused. If you need the hardware, order part...
CHF 3,81 -
CHF 3,60
Chain Guide—Model C, D, E
For use on the Model C, D and E Indoor Rower. This is the part that the chain passes through before entering into the flywheel assembly. See more info.
CHF 3,60 -
CHF 3,31
Footstrap
For use with updated Model D, Model E and Dynamic Indoor Rowers. Replacement nylon footstrap with buckle, approximately 30" long by 1" wide with a screwhole drilled approximately 9" from the buckle end. Two per machine. Sold individually. Model D/E Flexfoot Assembly Diagram
CHF 3,31 -
CHF 3,10
Shock Cord Pulley
For use with Model C, D and E Indoor Rowers. This is a 3-3/8 inch diameter pulley that the shock cord (part number 1731) runs over inside the Concept2 Indoor Rower. There are four per machine. Sold individually. See more info.
CHF 3,10 -
CHF 2,70
End Cap—Model C, D, E
For use on the Model C, D and E Indoor Rower. This is the end cap for the front of the indoor rower. See more info.
CHF 2,70 -
CHF 2,70
Monitor Mount Knob, 3/8-16
For use on all Model C, D, E, and Dynamic Indoor Rowers and the SkiErg. Using this knob instead of a nut makes it easier to take the monitor on and off of the equipment.
CHF 2,70 -
CHF 2,70
Chain Idler Pulley
For use with Model C, D and E Indoor Rowers. These are the 1¼" diameter urethane pulleys that the chain runs over inside the indoor rower. There are two per machine: one is part of the traveling pulley (part number 1756); the other is mounted on a stationary axle and has two chain idler spacers (part number 1305) to keep it properly aligned. See more info.
CHF 2,70 -
CHF 2,19
R8 Bearing—Model B, C, D, E, Dynamic
For use on all Model B, C, D, E and Dynamic Indoor Rowers. This is the R8 bearing located outside of the flywheel. The corresponding bearing cup (part number 1013 or 258 depending on which model you have) is sold separately. See more info.
CHF 2,19 -
CHF 2,19
Foot Cap
For use with Model A, B, C, D, E and Dynamic Indoor Rowers. This is the hard plastic cap that goes on the rear and/or front metal legs of the indoor rower to protect your carpet or floor and keep the machine from sliding back and forth while you row. Two to four per machine, depending on age and indoor rower model. Sold individually. See more info.
CHF 2,19 -
CHF 2,00
Upper Hanger—Updated Model D, E
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
CHF 2,00 -
CHF 1,60
Rear Bumper—Model C, D, E
For use on the Model C, D and E Indoor Rower. This is the bumper for the rear of the monorail. See more info.
CHF 1,60 -
CHF 1,41
-
CHF 1,41
Handle Hook
For use with Model C, D and E Indoor Rowers. This is the handle hook used on the Models C, D and E Indoor Rower. To store the handle long-term, place the handle up against the flywheel housing. For ease of use before or during a workout, placing the handle in the handle hook puts the handle within easy reach. Includes hardware.
CHF 1,41 -
CHF 1,31
Compression Member
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
CHF 1,31 -
CHF 1,10
-
CHF 1,03
-
CHF 0,95
Bolt, 3/8-16 x 4-1/2
This is the bolt for the top seat roller for all Model C, D, E and Dynamic Indoor Rowers. Order two per machine. See more info.
CHF 0,95 -
CHF 0,91
Foot Belly Reinforcing Bracket— Model D, E
For use with all Model D and Model E Indoor Rowers. This part is found inside the foot bellies. Order two per foot belly. See more info.
CHF 0,91 -
CHF 0,91
Bearing Cover
For use with Model C and D Indoor Rowers and all SkiErgs Plastic cover for the bearing on the left side of the Model C or D Indoor Rower, opposite the flywheel, and the back side of all SkiErgs.
CHF 0,91
