Indoor Rowers There are 84 products.

per page
Showing 51 - 75 of 84 items
  • CHF 8,00

    Chain Oil for use on the chains in concept2 Rowing machines

    CHF 8,00
  • CHF 5,90

    For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Does not include the mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame, because it can usually be reused. If you need the hardware, order part...

    CHF 5,90
  • CHF 5,30

    This is the part of the indoor rower that connects to the Performance Monitor on one end and the chain guide brackets on the other. For use on all Model C and Model D Indoor Rowers. See more info.

    CHF 5,30
  • CHF 5,00

    For use with updated Model D, Model E and Dynamic Indoor Rowers (made after July 21, 2006) only. If your indoor rower was made before July 21, 2006, order part number 1501 instead. Two per machine. Sold individually.

    CHF 5,00
  • CHF 4,50

    For use with the Model C, D and E Indoor Rowers. This is the 2" x 2" x 3/4" metal traveling pulley assembly with a chain idler pulley included. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the indoor rower on every stroke. One per machine. See more info.

    CHF 4,50
  • CHF 4,50

    For use with Model A, B, C and original D Indoor Rowers (made before July 21, 2006) only. If your indoor rower was made after July 21, 2006, order part number 1517 instead. Two per machine. Sold individually.

    CHF 4,50
  • CHF 4,50

    For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the right caster wheel.

    CHF 4,50
  • CHF 4,50

    For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel.

    CHF 4,50
  • CHF 4,00

    For use with Model C, D and E Indoor Rowers. These are the 1¼" diameter urethane pulleys that the chain runs over inside the indoor rower. There are two per machine: one is part of the traveling pulley (part number 1756); the other is mounted on a stationary axle and has two chain idler spacers (part number 1305) to keep it properly aligned. See more info.

    CHF 4,00
  • CHF 4,00

    For use with the updated Model D, Model E and Dynamic Indoor Rowers. Left footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram

    CHF 4,00
  • CHF 4,00

    For use with the updated Model D, Model E and Dynamic Indoor Rowers. Right footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram

    CHF 4,00
  • CHF 3,00

    T27 6-Lobe driver required to turn the front leg fasteners (part number 2952) on Model C, D (original and updated) and E Indoor Rowers.

    CHF 3,00
  • CHF 3,00

    For use with Model C, D and E Indoor Rowers. This is a 3-3/8 inch diameter pulley that the shock cord (part number 1731) runs over inside the Concept2 Indoor Rower. There are four per machine. Sold individually. See more info.

    CHF 3,00
  • CHF 3,00

    For the Dynamic Indoor Rower only. The clear plastic Wind Shield is designed to deflect air coming from the flywheel away from the rower´s body.

    CHF 3,00
  • CHF 2,00

    For use with Model A, B, C, D, E and Dynamic Indoor Rowers. This is the hard plastic cap that goes on the rear and/or front metal legs of the indoor rower to protect your carpet or floor and keep the machine from sliding back and forth while you row. Two to four per machine, depending on age and indoor rower model. Sold individually. See more info.

    CHF 2,00
  • CHF 2,00

    For use on all Model C, D, E, and Dynamic Indoor Rowers and the SkiErg. Using this knob instead of a nut makes it easier to take the monitor on and off of the equipment.

    CHF 2,00
  • CHF 2,00

    For use on the wooden handle originally sold on the Model A, B and C Indoor Rower. These are the black foam grips that fit on either end of the handle. Two per handle. Sold individually. Order two to have a pair. See more info.

    CHF 2,00
  • CHF 1,50

    For use with Model C, D and E Indoor Rowers. This is the handle hook used on the Models C, D and E Indoor Rower. To store the handle long-term, place the handle up against the flywheel housing. For ease of use before or during a workout, placing the handle in the handle hook puts the handle within easy reach. Includes hardware.

    CHF 1,50
  • CHF 1,50

    For use with Model C and D Indoor Rowers and all SkiErgs Plastic cover for the bearing on the left side of the Model C or D Indoor Rower, opposite the flywheel, and the back side of all SkiErgs.

    CHF 1,50
  • CHF 0,70

    This is the bolt for the top seat roller for all Model C, D, E and Dynamic Indoor Rowers. Order two per machine. See more info.

    CHF 0,70
  • CHF 0,30

    This is the flywheel cover bolt for the Model D and E Indoor Rower and all SkiErgs. Order four per machine.

    CHF 0,30
  • CHF 0,25

    This is the monitor bolt nut for the Model D and E Indoor Rower and all SkiErgs.

    CHF 0,25
  • CHF 0,25

    Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014.

    CHF 0,25
Showing 51 - 75 of 84 items