Parts There are 177 products.

Subcategories

  • Model B

    Parts listed here are compatible with Model B Indoor Rowers. Model Bs were manufactured from 1986–1993.

  • Model C
    Parts listed here are compatible with Model C Indoor Rowers. Model Cs were manufactured from 1993–2003.
  • Model D, Original
    Parts listed here are compatible with Model D Indoor Rowers manufactured from July 14, 2003–July 21, 2006 (serial numbers 071403–072106).
  • Model D, Updated
    Parts listed here are compatible with Model D Indoor Rowers manufactured from July 31, 2006–present (serial numbers 073106–present).
  • Model E
    Parts listed here are compatible with Model E Indoor Rowers (manufactured from August 2006–present).
  • Dynamic
    Parts listed here are compatible with Dynamic Indoor Rowers (manufactured from November 2010–present).
per page
Showing 26 - 50 of 177 items
  • CHF 26,50

    For use with Model D and E Indoor Rowers. This is the generator base and coil that transmit flywheel motion to and generates power for the Performance Monitor on your indoor rower. See more info. 

    CHF 26,50
  • CHF 26,00

    This is the handle drive cord for a Dynamic Indoor Rower. The handle drive cord is a single cord that is connected to the handle on one end and the foot carriage on the other end. Not for use on Model A, B, C, D, or E. See more info.

    CHF 26,00
  • CHF 25,00

    For use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Includes footstretcher belly, footstretcher cover, flexfoot, an internal brace piece and 7 screws.

    CHF 25,00
  • CHF 25,00

    For use on all Model C, D and E Indoor Rowers.  This is the stainless steel track for all rowers manufactured after January 1994. It measures 48 inches long and includes double-sided tape and two rivets for installation. See more info.

    CHF 25,00
  • CHF 25,00

    For use with all Model D and Model E Indoor Rowers manufactured from August 2006–present. Includes footstretcher belly, footstretcher cover, flexfoot, an internal brace piece and 7 screws.

    CHF 25,00
  • CHF 24,00

    For use with the Model A and B Indoor Rower (Ergometer) only.

    CHF 24,00
  • CHF 23,00

    For use with Model D and E Indoor Rowers and the SkiErg. This is the sensor coil for the power generator that transmits flywheel motion to and generates power for the Performance Monitor on your indoor rower or SkiErg. See more info.

    CHF 23,00
  • CHF 23,00

    For use on all Model D, E, Dynamic Indoor Rowers, SkiErg1s and SkiErg2s. This is the metal perforated part of the flywheel cage that wraps around the circumference of the flywheel. This part includes the connectors, screw and nut. See more info.

    CHF 23,00
  • CHF 21,00

    This is the metal part on the front top and front bottom of the monorail that makes contact with the hangar bolt tube on the front half of the indoor rower. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. Order two per machine. See more info.

    CHF 21,00
  • CHF 21,00

    For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time (see part number 1916). See more info.

    CHF 21,00
  • CHF 20,50

    For use with Model B and C Indoor Rowers. This kit allows you to retrofit the handle that comes standard on the Model D, E and Dynamic Indoor Rowers to your Model B or C. See more info.

    CHF 20,50
  • CHF 20,00

    For use with Model A and C Indoor Rowers. This is the pickup (sensor) and cable (wire) that transmit flywheel to the Performance Monitor on your indoor rower. If your monitor lights up with zeros but the display does not change when you begin rowing, you may need to replace this part. If the cable or cable housing is cut or broken you will definitely need...

    CHF 20,00
  • CHF 20,00

    Replacement handle for the Model D, E and Dynamic Indoor Rowers. Overmolded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. See more info.

    CHF 20,00
  • CHF 19,00

    For use on all black Model D Indoor Rowers manufactured after July 2006. See more info.

    CHF 19,00
  • CHF 19,00

    For use on all gray Model D Indoor Rowers manufactured after July 2012 and all SkiErg1s manufactured June 2009–July 2014. See more info.

    CHF 19,00
  • CHF 19,00

    For use on all light blue Model D Indoor Rowers manufactured from July 2003–July 2012. See more info.

    CHF 19,00
  • CHF 19,00

    For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...

    CHF 19,00
  • CHF 16,80

    For use on all black Model E Indoor Rowers. See more info.

    CHF 16,80
  • CHF 16,80

    For use on all Dynamic Indoor Rowers. See more info.

    CHF 16,80
  • CHF 16,80

    For use on all gray Model E Indoor Rowers. See more info.

    CHF 16,80
  • CHF 16,00

    For use on the Model D and E Indoor Rower.

    CHF 16,00
  • CHF 15,00

    For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws and lock washers (four each) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney"...

    CHF 15,00
  • CHF 12,00

    For use with Model C Indoor Rowers. This is the lever and damper (shutter) on the side of the flywheel housing that slides up and down to change the airflow through the flywheel. Less air through the flywheel (setting = 1) means less drag when rowing; more air through the flywheel (setting = 10) means more drag. Fits Model C Indoor Rowers only. See more...

    CHF 12,00
  • CHF 12,00

    For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.

    CHF 12,00
Showing 26 - 50 of 177 items