No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Parts Es gibt 97 Artikel.
Unterkategorien
-
Model B
Parts listed here are compatible with Model B Indoor Rowers. Model Bs were manufactured from 1986–1993.
-
Model C
Parts listed here are compatible with Model C Indoor Rowers. Model Cs were manufactured from 1993–2003.
-
Model D, Original
Parts listed here are compatible with Model Ds manufactured from July 14, 2003–July 21, 2006 (serial numbers 071403–072106).
-
Model D/RowErg
Parts listed here are compatible with Model Ds manufactured from July 31, 2006–present (serial numbers 073106–present).
-
Model E
Parts listed here are compatible with Model E Indoor Rowers (manufactured from August 2006–January 2021).
-
Dynamic
Parts listed here are compatible with Dynamic Indoor Rowers (manufactured from November 2010–present).
-
CHF 0,80
Screw, 6-lobe, 1/4-20 x 3/4
Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014. See more info.
CHF 0,80 -
CHF 0,80
Screw, 6-lobe, 1/4-20 x 5/8, epoxy
Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014.
CHF 0,80 -
CHF 0,76
Seat Spacer—Model A, B
For use with the Model A and B Indoor Rower (Ergometer) only. This spacer is part of the seat roller hardware.
CHF 0,76 -
CHF 0,65
Perf Connector, Screw Side
For use on all Model D, E, Dynamic Indoor Rowers, SkiErgs and BikeErgs. This is the screw side connector for the perf outlet. See more info.
CHF 0,65 -
CHF 0,65
Perf Connector, Nut Side
For use on all Model D, E, Dynamic Indoor Rowers, SkiErgs and BikeErgs. This is the nut side connector for the perf outlet. See more info.
CHF 0,65 -
CHF 0,65
Seat Roller Nut—Model A, B
For use with the Model A and B Indoor Rower (Ergometer) only. This is part of the seat roller hardware.
CHF 0,65 -
CHF 0,40
R8 Bearing Cup—Model C, D, E, Dynamic
For use on all Model C, D, E and Dynamic Indoor Rowers as well as all SkiErgs. This is the rubber bearing cup that holds the R8 bearing on indoor rowers (part number 232, sold separately) and the 12mm bearing on SkiErgs. See more info.
CHF 0,40 -
CHF 0,30
Flywheel Cover Bolt 10 x 3
This is the flywheel cover bolt for the Model D and E Indoor Rower and all SkiErgs. Order four per machine.
CHF 0,30 -
CHF 0,27
Screw, 6-lobe, 1/4-20 x 3/8
This is the handle hook screw on the Model C, D and E Indoor Rower. See more info.
CHF 0,27 -
CHF 0,22
-
CHF 0,19
Screw, 6-lobe, 1/4-20 x 3/4
Used on the guide bracket of Model D Indoor Rowers, and on the rear leg of Model C and D Indoor Rowers.
CHF 0,19 -
CHF 0,16
Hexnut, 3/8-16
This is the monitor bolt nut for the Model D and E Indoor Rower and all SkiErgs.
CHF 0,16 -
CHF 0,15
Washer, 3/8"
This washer is used in various places on the Model A, B, C, D and E Indoor Rowers as well as the gray SkiErg manufactured between July 2009–July 2014.
CHF 0,15 -
CHF 0,15
Seat Rubber Washer—Model A, B
For use with the Model A and B Indoor Rower (Ergometer) only. This is part of the seat roller hardware.
CHF 0,15 -
CHF 0,15
Hex Cap Screw
For use with Model D and Model E Indoor Rowers manufactured from August 2006–present. This screw is used on the foot stretcher bellies.
CHF 0,15 -
CHF 0,15
Nut, 3/8-16, nylock
Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manufactured between July 2009–July 2014. See more info.
CHF 0,15 -
CHF 0,15
Nut for Handle U-bolt
This is the 1/4-20 Nylock nut that is used with the composite handle that comes standard on the Model D and E Indoor Rowers. The corresponding U-bolt is part number 244. Order two per handle. Also used in various places on the Model C and Dynamic Indoor Rower and all SkiErgs. See more info.
CHF 0,15 -
CHF 0,11
Screw, Panhead Phillips No. 8 x 1
For use with Model D and E Indoor Rowers and all SkiErgs. Used to fasten the generator cover in place. See more info.
CHF 0,11 -
CHF 0,10
Nut, No.10 Stainless Steel
Used in various places on the Model D, E and Dynamic Indoor Rower and all SkiErgs.
CHF 0,10 -
CHF 0,08
Lock Washer, 1/4"
Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014.
CHF 0,08 -
CHF 0,08
Nut, 1/4-20, nylock
This is the nut used in the travelling pulley on the Model C, D and E Indoor Rower and in the top bracket of the gray SkiErg manfactured between July 2009–July 2014.
CHF 0,08 -
CHF 0,00
Foot Belly Reinforcement Kit
For use with Model D, E and Dynamic Indoor Rowers with manufacture dates from March 13, 2015–August 27, 2015. If the foot belly screws on your machine are loosening with use, this reinforcement kit will remedy the problem. Kit contains two triangular braces that reduce flexing of the foot belly, and 14 new style screws that are less prone to loosening.
CHF 0,00
