No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Home
Parts listed here are compatible with Model B Indoor Rowers. Model Bs were manufactured from 1986–1993.
Model B Es gibt 24 Artikel.
-
CHF 225,00
-
CHF 148,00
Maintenance Kit—Model B
For use with Model B Indoor Rowers only. Includes the most common wear and tear parts to keep your Model B in top condition. See more info.
CHF 148,00 -
CHF 48,01
-
CHF 23,00
Handle Retrofit Kit—Model B,C
For use with Model B and C Indoor Rowers. This kit allows you to retrofit the handle that comes standard on the Model D, E and Dynamic Indoor Rowers to your Model B or C. Handle is 19" long with overmolded grips and features an ergonomic 10-degree bend that better simulates arm position of on water rowing and provides a more comfortable position...
CHF 23,00 -
CHF 21,00
Indoor Rower Handle with Grips
Replacement handle for the Model D, E and Dynamic Indoor Rowers. Overmolded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. See more info.
CHF 21,00 -
CHF 19,50
Seat Top with Screws
For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws and lock washers (four each) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney"...
CHF 19,50 -
CHF 13,00
Shock Cord Pulley A/B
For use with all Model B Indoor Rowers, as well as Model A Indoor Rowers that have been retrofitted with the skewer assembly. Order two per machine. See more info.
CHF 13,00 -
CHF 10,01
-
CHF 8,00
Chain Oil
This is a 3-ounce bottle of 3-IN-ONE® Multi-Purpose Oil. Recommended for lubricating the chains on Concept2 Indoor Rowers.
CHF 8,00 -
CHF 4,99
Foot Caster, Right
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the right caster wheel.
CHF 4,99 -
CHF 4,99
Foot Caster, Left
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel.
CHF 4,99 -
CHF 4,59
Flexfoot Toepiece with Screws and Nut
For use with Model C, original Model D and Retrofitted Model A and B Indoor Rowers. This is the 12" molded plastic part anchored with 4 screws and nuts to the metal footplates on the indoor rower, enabling you to adjust the Flexfoot (part number 1017, sold separately) to accommodate different foot sizes and body types. There are two per machine. See more...
CHF 4,59 -
CHF 3,31
Footstrap, 30"—For indoor rowers after...
For use with updated Model D, Model E and Dynamic Indoor Rowers. Replacement nylon footstrap with buckle, approximately 30" long by 1" wide with a screwhole drilled approximately 9" from the buckle end. Two per machine. Sold individually. Model D/E Flexfoot Assembly Diagram
CHF 3,31 -
CHF 3,31
Footstrap, 24"—For indoor rowers before...
For use with Model A, B, C and original D Indoor Rowers. Replacement nylon footstrap with buckle, approximately 24" long by 1" wide with a screwhole drilled approximately 7" from the buckle end. Two per machine. Sold individually. Replacement Instructions (also on concept2.com/service): Model C/D Flexfoot Assembly Diagram Model A/B Footstrap...
CHF 3,31 -
CHF 3,20
Handle U-bolt with Nuts—Model A, B, C
This is the handle u-bolt and 1/4-20 heavy Nylock nuts that are used with the wooden handle that came standard on the Model A, B and C Indoor Rowers. Includes one u-bolt and two nuts.
CHF 3,20 -
CHF 2,19
Wooden Handle Grip—Model A, B, C
For use on the wooden handle originally sold on the Model A, B and C Indoor Rower. These are the black foam grips that fit on either end of the handle. Two per handle. Sold individually. Order two to have a pair. See more info.
CHF 2,19 -
CHF 2,19
R8 Bearing—Model B, C, D, E, Dynamic
For use on all Model B, C, D, E and Dynamic Indoor Rowers. This is the R8 bearing located outside of the flywheel. The corresponding bearing cup (part number 1013 or 258 depending on which model you have) is sold separately. See more info.
CHF 2,19 -
CHF 2,19
Foot Cap
For use with Model A, B, C, D, E and Dynamic Indoor Rowers. This is the hard plastic cap that goes on the rear and/or front metal legs of the indoor rower to protect your carpet or floor and keep the machine from sliding back and forth while you row. Two to four per machine, depending on age and indoor rower model. Sold individually. See more info.
CHF 2,19 -
CHF 1,41
Wooden Handle U-bolt
For use with the wooden handle on all models of indoor rowers. Connects the handle to the chain. The corresponding nuts are part number 240 for a Model A, B or C and part number 1235 for Model D and E.
CHF 1,41 -
CHF 0,95
Seat Roller Bolt—Model A, B
For use with the Model A and B Indoor Rower (Ergometer) only. This is part of the seat roller hardware.
CHF 0,95 -
CHF 0,76
Seat Spacer—Model A, B
For use with the Model A and B Indoor Rower (Ergometer) only. This spacer is part of the seat roller hardware.
CHF 0,76 -
CHF 0,65
Seat Roller Nut—Model A, B
For use with the Model A and B Indoor Rower (Ergometer) only. This is part of the seat roller hardware.
CHF 0,65 -
CHF 0,15
Washer, 3/8"
This washer is used in various places on the Model A, B, C, D and E Indoor Rowers as well as the gray SkiErg manufactured between July 2009–July 2014.
CHF 0,15 -
CHF 0,15
Seat Rubber Washer—Model A, B
For use with the Model A and B Indoor Rower (Ergometer) only. This is part of the seat roller hardware.
CHF 0,15
