skip to main content
/ /Parts

Parts Es gibt 97 Artikel.

Unterkategorien

  • Model B

    Parts listed here are compatible with Model B Indoor Rowers. Model Bs were manufactured from 1986–1993.

  • Model C

    Parts listed here are compatible with Model C Indoor Rowers. Model Cs were manufactured from 1993–2003.

  • Model D, Original

    Parts listed here are compatible with Model Ds manufactured from July 14, 2003–July 21, 2006 (serial numbers 071403–072106).

  • Model D/RowErg

    Parts listed here are compatible with Model Ds manufactured from July 31, 2006–present (serial numbers 073106–present).

  • Model E

    Parts listed here are compatible with Model E Indoor Rowers (manufactured from August 2006–January 2021).

  • Dynamic
    Parts listed here are compatible with Dynamic Indoor Rowers (manufactured from November 2010–present).
pro Seite
Zeige 26 - 50 von 97 Artikeln
  • CHF 24,99

    For use with Model A and C Indoor Rowers. This is the pickup (sensor) and cable (wire) that transmit flywheel to the Performance Monitor on your indoor rower. If your monitor lights up with zeros but the display does not change when you begin rowing, you may need to replace this part. If the cable or cable housing is cut or broken you will definitely need...

    CHF 24,99
    In den Warenkorb Mehr
  • CHF 23,00

    For use with Model B and C Indoor Rowers. This kit allows you to retrofit the handle that comes standard on the Model D, E and  Dynamic Indoor Rowers to your Model B or C. Handle is 19" long with overmolded grips and features an ergonomic 10-degree bend that better simulates arm position of on water rowing and provides a more comfortable position...

    CHF 23,00
    In den Warenkorb Mehr
  • CHF 22,00

    For use with Model C and original Model D Indoor Rowers. This is the Framelock Kit for all Model C and original Model D Indoor Rowers. It includes the axle, the framelock, the framelock cord, two screws, two washers and a hexkey tool.

    CHF 22,00
    In den Warenkorb Mehr
  • CHF 19,50

    For use on all black Model D Indoor Rowers manufactured after July 2006. See more info.

    CHF 19,50
    In den Warenkorb Mehr
  • CHF 19,50

    For use on all gray Model D Indoor Rowers manufactured after July 2012 and all SkiErg1s manufactured June 2009–July 2014. See more info.

    CHF 19,50
    In den Warenkorb Mehr
  • CHF 19,50

    For use on all light blue Model D Indoor Rowers manufactured from July 2003–July 2012. See more info.

    CHF 19,50
    In den Warenkorb Mehr
  • CHF 19,50

    For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws and lock washers (four each) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney"...

    CHF 19,50
    In den Warenkorb Mehr
  • CHF 17,50

    Cog nut tool with clutch. Not compatible with the Model B Indoor Rower.

    CHF 17,50
    In den Warenkorb Mehr
  • CHF 16,50

    For use with Concept2 Slides. Includes two elastic replacement shock cords and hardware necessary to anchor them to the Slide. Order one per Slide. See more info.

    CHF 16,50
    In den Warenkorb Mehr
  • CHF 16,01

    For use on the Model D and E Indoor Rower.

    CHF 16,01
    In den Warenkorb Mehr
  • CHF 13,49

    For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...

    CHF 13,49
    In den Warenkorb Mehr
  • CHF 13,00

    For use with all Model B Indoor Rowers, as well as Model A Indoor Rowers that have been retrofitted with the skewer assembly. Order two per machine. See more info.

    CHF 13,00
    In den Warenkorb Mehr
  • CHF 10,01

    CHF 10,01
    In den Warenkorb Mehr
  • CHF 9,50

    CHF 9,50
    In den Warenkorb Mehr
  • CHF 9,00

    For use with Model C Indoor Rowers. This is the lever and damper (shutter) on the side of the flywheel housing that slides up and down to change the airflow through the flywheel. Less air through the flywheel (setting = 1) means less drag when rowing; more air through the flywheel (setting = 10) means more drag. Fits Model C Indoor Rowers only. See more...

    CHF 9,00
    In den Warenkorb Mehr
  • CHF 8,50

    For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.

    CHF 8,50
    In den Warenkorb Mehr
  • CHF 8,00

    This is a 3-ounce bottle of 3-IN-ONE® Multi-Purpose Oil. Recommended for lubricating the chains on Concept2 Indoor Rowers.

    CHF 8,00
    In den Warenkorb Mehr
  • CHF 7,49

    For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time (see part number 1916). See more info.

    CHF 7,49
    In den Warenkorb Mehr
  • CHF 7,49

    For use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color (for black, order part number 1017 instead). This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot...

    CHF 7,49
    In den Warenkorb Mehr
  • CHF 6,00

    This is the part of the indoor rower that connects to the Performance Monitor on one end and the chain guide brackets on the other. For use on all Model C and Model D Indoor Rowers. See more info.

    CHF 6,00
    In den Warenkorb Mehr
  • CHF 5,50

    For use with the Model C, D and E Indoor Rowers. This is the 2" x 2" x 3/4" metal traveling pulley assembly with a chain idler pulley included. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the indoor rower on every stroke. One per machine. See more info.

    CHF 5,50
    In den Warenkorb Mehr
  • CHF 4,40

    T27 6-Lobe driver required to turn the front leg fasteners (part number 2952) on Model C, D (original and updated) and E Indoor Rowers.

    CHF 4,40
    In den Warenkorb Mehr
  • CHF 3,90

    For use with the updated Model D, Model E and Dynamic Indoor Rowers. Right footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram

    CHF 3,90
    In den Warenkorb Mehr
  • CHF 3,90

    For use with the updated Model D, Model E and Dynamic Indoor Rowers. Left footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram

    CHF 3,90
    In den Warenkorb Mehr
  • CHF 3,81

    For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Does not include the mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame, because it can usually be reused. If you need the hardware, order part...

    CHF 3,81
    In den Warenkorb Mehr
Zeige 26 - 50 von 97 Artikeln