No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Parts Es gibt 97 Artikel.
Unterkategorien
-
Model B
Parts listed here are compatible with Model B Indoor Rowers. Model Bs were manufactured from 1986–1993.
-
Model C
Parts listed here are compatible with Model C Indoor Rowers. Model Cs were manufactured from 1993–2003.
-
Model D, Original
Parts listed here are compatible with Model Ds manufactured from July 14, 2003–July 21, 2006 (serial numbers 071403–072106).
-
Model D/RowErg
Parts listed here are compatible with Model Ds manufactured from July 31, 2006–present (serial numbers 073106–present).
-
Model E
Parts listed here are compatible with Model E Indoor Rowers (manufactured from August 2006–January 2021).
-
Dynamic
Parts listed here are compatible with Dynamic Indoor Rowers (manufactured from November 2010–present).
-
CHF 3,60
Chain Guide—Model C, D, E
For use on the Model C, D and E Indoor Rower. This is the part that the chain passes through before entering into the flywheel assembly. See more info.
CHF 3,60 -
CHF 3,31
Footstrap, 24"—For indoor rowers before...
For use with Model A, B, C and original D Indoor Rowers. Replacement nylon footstrap with buckle, approximately 24" long by 1" wide with a screwhole drilled approximately 7" from the buckle end. Two per machine. Sold individually. Replacement Instructions (also on concept2.com/service): Model C/D Flexfoot Assembly Diagram Model A/B Footstrap...
CHF 3,31 -
CHF 3,31
Footstrap, 30"—For indoor rowers after...
For use with updated Model D, Model E and Dynamic Indoor Rowers. Replacement nylon footstrap with buckle, approximately 30" long by 1" wide with a screwhole drilled approximately 9" from the buckle end. Two per machine. Sold individually. Model D/E Flexfoot Assembly Diagram
CHF 3,31 -
CHF 3,20
Handle U-bolt with Nuts—Model A, B, C
This is the handle u-bolt and 1/4-20 heavy Nylock nuts that are used with the wooden handle that came standard on the Model A, B and C Indoor Rowers. Includes one u-bolt and two nuts.
CHF 3,20 -
CHF 3,10
Shock Cord Pulley
For use with Model C, D and E Indoor Rowers. This is a 3-3/8 inch diameter pulley that the shock cord (part number 1731) runs over inside the Concept2 Indoor Rower. There are four per machine. Sold individually. See more info.
CHF 3,10 -
CHF 2,90
Technique Label—Model D
For use on all Model D Indoor Rowers. This label illustrates proper rowing technique. Place just above the handle hook.
CHF 2,90 -
CHF 2,90
Wind Shield
The clear plastic Wind Shield is located on the top of the Dynamic flywheel and designed to deflect air coming from the flywheel away from the rower´s body.
CHF 2,90 -
CHF 2,70
Chain Idler Pulley
For use with Model C, D and E Indoor Rowers. These are the 1¼" diameter urethane pulleys that the chain runs over inside the indoor rower. There are two per machine: one is part of the traveling pulley (part number 1756); the other is mounted on a stationary axle and has two chain idler spacers (part number 1305) to keep it properly aligned. See more info.
CHF 2,70 -
CHF 2,70
End Cap—Model C, D, E
For use on the Model C, D and E Indoor Rower. This is the end cap for the front of the indoor rower. See more info.
CHF 2,70 -
CHF 2,19
R8 Bearing—Model B, C, D, E, Dynamic
For use on all Model B, C, D, E and Dynamic Indoor Rowers. This is the R8 bearing located outside of the flywheel. The corresponding bearing cup (part number 1013 or 258 depending on which model you have) is sold separately. See more info.
CHF 2,19 -
CHF 2,19
Wooden Handle Grip—Model A, B, C
For use on the wooden handle originally sold on the Model A, B and C Indoor Rower. These are the black foam grips that fit on either end of the handle. Two per handle. Sold individually. Order two to have a pair. See more info.
CHF 2,19 -
CHF 2,00
Upper Hanger—Updated Model D, E
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
CHF 2,00 -
CHF 1,79
Top Front Bumper
This is part of the front monorail assembly. It is made of black plastic. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.
CHF 1,79 -
CHF 1,70
Nut, 3/8-16 Acorn—Model C and D
This is the acorn nut found on the top of the front bumper of the monorail. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. Order two per machine. See more info.
CHF 1,70 -
CHF 1,60
Rear Bumper—Model C, D, E
For use on the Model C, D and E Indoor Rower. This is the bumper for the rear of the monorail. See more info.
CHF 1,60 -
CHF 1,41
Wooden Handle U-bolt
For use with the wooden handle on all models of indoor rowers. Connects the handle to the chain. The corresponding nuts are part number 240 for a Model A, B or C and part number 1235 for Model D and E.
CHF 1,41 -
CHF 1,41
Handle Hook
For use with Model C, D and E Indoor Rowers. This is the handle hook used on the Models C, D and E Indoor Rower. To store the handle long-term, place the handle up against the flywheel housing. For ease of use before or during a workout, placing the handle in the handle hook puts the handle within easy reach. Includes hardware.
CHF 1,41 -
CHF 1,31
Compression Member
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
CHF 1,31 -
CHF 1,10
Bottom Front Bumper
This is part of the front monorail assembly. It is made of black plastic. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.
CHF 1,10 -
CHF 1,10
-
CHF 1,03
-
CHF 0,95
Bolt, 3/8-16 x 4-1/2
This is the bolt for the top seat roller for all Model C, D, E and Dynamic Indoor Rowers. Order two per machine. See more info.
CHF 0,95 -
CHF 0,95
Seat Roller Bolt—Model A, B
For use with the Model A and B Indoor Rower (Ergometer) only. This is part of the seat roller hardware.
CHF 0,95 -
CHF 0,91
Foot Belly Reinforcing Bracket— Model D, E
For use with all Model D and Model E Indoor Rowers. This part is found inside the foot bellies. Order two per foot belly. See more info.
CHF 0,91 -
CHF 0,91
Bearing Cover
For use with Model C and D Indoor Rowers and all SkiErgs Plastic cover for the bearing on the left side of the Model C or D Indoor Rower, opposite the flywheel, and the back side of all SkiErgs.
CHF 0,91
