Geen producten
Prijzen zijn incl. btw
Het product is succesvol aan uw winkelwagen toegevoegd
Er zijn 0 artikelen in uw winkelwagen. Er is 1 artikel in uw winkelwagen.
Model D, Origineel (D1)
Home
Bekeken producten
Model D, Origineel (D1) Es gibt 73 Artikel.
-
CHF 6,00
-
CHF 5,50
Travelling Pulley Assembly
For use with the Model C, D and E Indoor Rowers. This is the 2" x 2" x 3/4" metal traveling pulley assembly with a chain idler pulley included. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the indoor rower on every stroke. One per machine. See more info.
CHF 5,50 -
CHF 4,59
Flexfoot Toepiece with Screws and Nut
For use with Model C, original Model D and Retrofitted Model A and B Indoor Rowers. This is the 12" molded plastic part anchored with 4 screws and nuts to the metal footplates on the indoor rower, enabling you to adjust the Flexfoot (part number 1017, sold separately) to accommodate different foot sizes and body types. There are two per machine. See more...
CHF 4,59 -
CHF 4,40
-
CHF 4,00
Footstrap
For use with Model A, B, C and original D Indoor Rowers. Replacement nylon footstrap with buckle, approximately 24" long by 1" wide with a screwhole drilled approximately 7" from the buckle end. Two per machine. Sold individually.
CHF 4,00 -
CHF 4,00
Footstrap
For use with updated Model D, Model E and Dynamic Indoor Rowers. Replacement nylon footstrap with buckle, approximately 30" long by 1" wide with a screwhole drilled approximately 9" from the buckle end. Two per machine. Sold individually. Model D/E Flexfoot Assembly Diagram
CHF 4,00 -
CHF 3,81
-
CHF 3,81
Seat Roller, Bottom
For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Does not include the mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame, because it can usually be reused. If you need the hardware, order part...
CHF 3,81 -
CHF 3,60
-
CHF 3,10
Shock Cord Pulley
For use with Model C, D and E Indoor Rowers. This is a 3-3/8 inch diameter pulley that the shock cord (part number 1731) runs over inside the Concept2 Indoor Rower. There are four per machine. Sold individually. See more info.
CHF 3,10 -
CHF 2,90
-
CHF 2,70
-
CHF 2,70
-
CHF 2,70
Chain Idler Pulley
For use with Model C, D and E Indoor Rowers. These are the 1¼" diameter urethane pulleys that the chain runs over inside the indoor rower. There are two per machine: one is part of the traveling pulley (part number 1756); the other is mounted on a stationary axle and has two chain idler spacers (part number 1305) to keep it properly aligned. See more info.
CHF 2,70 -
CHF 2,19
-
CHF 2,19
Foot Cap
For use with Model A, B, C, D and E Indoor Rowers. This is the hard plastic cap that goes on the rear metal legs of the indoor rower to protect your carpet or floor and keep the machine from sliding back and forth while you row. Two per machine. Sold individually.
CHF 2,19 -
CHF 1,79
-
CHF 1,70
-
CHF 1,60
-
CHF 1,41
Handle Hook
For use with Model C, D and E Indoor Rowers. This is the handle hook used on the Models C, D and E Indoor Rower. To store the handle long-term, place the handle up against the flywheel housing. For ease of use before or during a workout, placing the handle in the handle hook puts the handle within easy reach. Includes hardware.
CHF 1,41 -
CHF 1,41
-
CHF 1,10
-
CHF 1,10
-
CHF 1,03
-
CHF 0,95
