No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Home
RowErgs Es gibt 93 Artikel.
Unterkategorien
-
CHF 6,00
Monitor Arm, Black
This is the part of the indoor rower that connects to the Performance Monitor on one end and the chain guide brackets on the other. For use on all Model C and Model D Indoor Rowers. See more info.
CHF 6,00 -
CHF 5,50
Travelling Pulley Assembly
For use with the Model C, D and E Indoor Rowers. This is the 2" x 2" x 3/4" metal traveling pulley assembly with a chain idler pulley included. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the indoor rower on every stroke. One per machine. See more info.
CHF 5,50 -
CHF 4,99
Foot Caster, Right
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the right caster wheel.
CHF 4,99 -
CHF 4,99
Foot Caster, Left
For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel.
CHF 4,99 -
CHF 4,40
T27 6-Lobe Driver
T27 6-Lobe driver required to turn the front leg fasteners (part number 2952) on Model C, D (original and updated) and E Indoor Rowers.
CHF 4,40 -
CHF 3,90
Footstretcher Cover, Left
For use with the updated Model D, Model E and Dynamic Indoor Rowers. Left footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
CHF 3,90 -
CHF 3,90
Footstretcher Cover, Right
For use with the updated Model D, Model E and Dynamic Indoor Rowers. Right footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
CHF 3,90 -
CHF 3,81
Seat Roller, Bottom
For use with Model C, D, E and Dynamic Indoor Rowers. This is one of the small bottom seat rollers (two per machine; sold individually) that runs under the top edge of the monorail. Does not include the mounting hardware (nut, bolt and spacers) that hold the roller on the seat frame, because it can usually be reused. If you need the hardware, order part...
CHF 3,81 -
CHF 3,31
Footstrap, 24"—For indoor rowers before...
For use with Model A, B, C and original D Indoor Rowers. Replacement nylon footstrap with buckle, approximately 24" long by 1" wide with a screwhole drilled approximately 7" from the buckle end. Two per machine. Sold individually. Replacement Instructions (also on concept2.com/service): Model C/D Flexfoot Assembly Diagram Model A/B Footstrap...
CHF 3,31 -
CHF 3,31
Footstrap, 30"—For indoor rowers after...
For use with updated Model D, Model E and Dynamic Indoor Rowers. Replacement nylon footstrap with buckle, approximately 30" long by 1" wide with a screwhole drilled approximately 9" from the buckle end. Two per machine. Sold individually. Model D/E Flexfoot Assembly Diagram
CHF 3,31 -
CHF 3,20
Handle U-bolt with Nuts—Model A, B, C
This is the handle u-bolt and 1/4-20 heavy Nylock nuts that are used with the wooden handle that came standard on the Model A, B and C Indoor Rowers. Includes one u-bolt and two nuts.
CHF 3,20 -
CHF 3,10
Shock Cord Pulley
For use with Model C, D and E Indoor Rowers. This is a 3-3/8 inch diameter pulley that the shock cord (part number 1731) runs over inside the Concept2 Indoor Rower. There are four per machine. Sold individually. See more info.
CHF 3,10 -
CHF 2,90
Technique Label—Model D
For use on all Model D Indoor Rowers. This label illustrates proper rowing technique. Place just above the handle hook.
CHF 2,90 -
CHF 2,90
Wind Shield
The clear plastic Wind Shield is located on the top of the Dynamic flywheel and designed to deflect air coming from the flywheel away from the rower´s body.
CHF 2,90 -
CHF 2,70
Chain Idler Pulley
For use with Model C, D and E Indoor Rowers. These are the 1¼" diameter urethane pulleys that the chain runs over inside the indoor rower. There are two per machine: one is part of the traveling pulley (part number 1756); the other is mounted on a stationary axle and has two chain idler spacers (part number 1305) to keep it properly aligned. See more info.
CHF 2,70 -
CHF 2,19
Wooden Handle Grip—Model A, B, C
For use on the wooden handle originally sold on the Model A, B and C Indoor Rower. These are the black foam grips that fit on either end of the handle. Two per handle. Sold individually. Order two to have a pair. See more info.
CHF 2,19 -
CHF 2,19
Foot Cap
For use with Model A, B, C, D, E and Dynamic Indoor Rowers. This is the hard plastic cap that goes on the rear and/or front metal legs of the indoor rower to protect your carpet or floor and keep the machine from sliding back and forth while you row. Two to four per machine, depending on age and indoor rower model. Sold individually. See more info.
CHF 2,19 -
CHF 2,00
Upper Hanger—Updated Model D, E
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
CHF 2,00 -
CHF 1,79
Top Front Bumper
This is part of the front monorail assembly. It is made of black plastic. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.
CHF 1,79 -
CHF 1,41
Wooden Handle U-bolt
For use with the wooden handle on all models of indoor rowers. Connects the handle to the chain. The corresponding nuts are part number 240 for a Model A, B or C and part number 1235 for Model D and E.
CHF 1,41 -
CHF 1,41
Handle Hook
For use with Model C, D and E Indoor Rowers. This is the handle hook used on the Models C, D and E Indoor Rower. To store the handle long-term, place the handle up against the flywheel housing. For ease of use before or during a workout, placing the handle in the handle hook puts the handle within easy reach. Includes hardware.
CHF 1,41 -
CHF 1,31
Compression Member
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
CHF 1,31 -
CHF 1,10
Bottom Front Bumper
This is part of the front monorail assembly. It is made of black plastic. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.
CHF 1,10 -
CHF 1,10
Smartphone Cradle for PM5, PM4 and PM3
For use with a PM5, PM4 or PM3, the Smartphone Cradle slides onto the top of the PM to provide a place to set your mobile device while using the indoor rower or SkiErg. See more info.
CHF 1,10 -
CHF 1,03
