Geen producten
Prijzen zijn incl. btw
Het product is succesvol aan uw winkelwagen toegevoegd
Er zijn 0 artikelen in uw winkelwagen. Er is 1 artikel in uw winkelwagen.
Onderdelen Es gibt 98 Artikel.
Unterkategorien
-
Model B
-
Model C
-
Model D, Origineel (D1)
-
Model D, Updated (D2)
Parts listed here are compatible with Model Ds with serial numbers 073106–present.
-
Model E
-
Dynamic
-
CHF 24,99
Monitor Pickup and Screw Kit—Model A, C
For use with Model A and C Indoor Rowers. This is the pickup (sensor) and cable (wire) that transmit flywheel to the Performance Monitor on your indoor rower. If your monitor lights up with zeros but the display does not change when you begin rowing, you may need to replace this part. If the cable or cable housing is cut or broken you will definitely need...
CHF 24,99 -
CHF 23,00
Handle Retrofit Kit—Model B,C
For use with Model B and C Indoor Rowers. This kit allows you to retrofit the handle that comes standard on the Model D, E and Dynamic Indoor Rowers to your Model B or C. Handle is 19" long with overmolded grips and features an ergonomic 10-degree bend that better simulates arm position of on water rowing and provides a more comfortable position...
CHF 23,00 -
CHF 22,00
Frame Lock and Hardware
For use with Model C and original Model D Indoor Rowers. This is the Framelock Kit for all Model C and original Model D Indoor Rowers. It includes the axle, the framelock, the framelock cord, two screws, two washers and a hexkey tool.
CHF 22,00 -
CHF 20,00
Seat Roller with Hardware
For use with Model A and B Indoor Rowers. This is one of the 2¼" wide seat rollers and its hardware (order a quantity of three per indoor rower) that run on the top and bottom of the stainless steel tube monorail. Includes the seat roller bearings (sealed inside) and includes all of the mounting hardware (nut, bolt, and spacers) that holds it into the...
CHF 20,00 -
CHF 19,50
-
CHF 19,50
-
CHF 19,50
-
CHF 19,50
Seat Top with Screws
For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws and lock washers (four each) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney"...
CHF 19,50 -
CHF 17,50
-
CHF 16,50
-
CHF 16,01
-
CHF 13,49
Seat Roller, Top
For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...
CHF 13,49 -
CHF 13,00
-
CHF 10,01
-
CHF 9,50
-
CHF 9,00
Damper Replacement Kit
For use with Model C Indoor Rowers. This is the lever and damper (shutter) on the side of the flywheel housing that slides up and down to change the airflow through the flywheel. Less air through the flywheel (setting = 1) means less drag when rowing; more air through the flywheel (setting = 10) means more drag. Fits Model C Indoor Rowers only. See more...
CHF 9,00 -
CHF 8,50
Shock Cord
For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.
CHF 8,50 -
CHF 8,00
-
CHF 7,49
-
CHF 7,49
Flexfoot, Gray
For use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color (for black, order part number 1017 instead). This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot...
CHF 7,49 -
CHF 6,00
-
CHF 5,50
Travelling Pulley Assembly
For use with the Model C, D and E Indoor Rowers. This is the 2" x 2" x 3/4" metal traveling pulley assembly with a chain idler pulley included. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the indoor rower on every stroke. One per machine. See more info.
CHF 5,50 -
CHF 4,40
-
CHF 3,90
Footstretcher Cover, Left
For use with the updated Model D, Model E and Dynamic Indoor Rowers. Left footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
CHF 3,90 -
CHF 3,90
Footstretcher Cover, Right
For use with the updated Model D, Model E and Dynamic Indoor Rowers. Right footstretcher cover. The flextfoot piece (part number (part number 1063, sold separately) fits into this part to make the complete footstretcher assembly. Footplate/Flexfoot Assembly Diagram
CHF 3,90
